8/29/2023 0 Comments Vion barometer instruction manual![]() If all the bulbs sink, the temperature is over the highest bulb. If all the bulbs float to the top, the temperature is under the lowest floating bulb.ĭ. When there is a bulb in the middle, the temperature is between that degree and the lowest floating bulb.Ĭ. The temperature is determined by the lowest floating bulb in the thermometer.ī. When the temperature drops, the liquid inside the thermometer becomes more dense and the liquid-filled bulbs will float.Ī. When temperature rises, the liquid inside the glass thermometer becomes less dense and the liquid-filled bulbs will sink. Some evaporation may occur over time and additional water can be added as needed. Once filled, the water in the spout will immediately respond to changes in barometric pressure. Once you remove the injection tube the water should be further up the spout. You may want to do this over a sink and have a cloth or paper towels handy for clean up. Water will rise up the spout and may overflow. Do not turn the Storm Glass upside down for this procedure. If the water is not at this level, fill the syringe with air and insert the filling tube back into the top of the water chamber. The water should be about 1″ up the spout of the Storm Glass. 8) Remove the injection tube from the Storm Glass.ĩ) Turn the Storm Glass back to its upright position and set it on a flat surface.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |